MITEQ designs and manufactures a broad range of passive and active frequency multipliers. You will find a wide variety of standard designs which will meet typical applications.

Most of MITEQ’s frequency multiplier designs perform to specific customer requirements and cannot easily be categorized into standard products. Parameters such as frequency range, bandwidth, spurious rejection and multiplication ratios are normally determined by specific system requirements. These requirements, in turn, translate into custom-designed filter and amplifier specifications at the multiplier design level. Please contact MITEQ regarding your specific requirements.

Customize Your Passive
And Active Frequency Multiplier:
MITEQ maintains dedicated engineering resources to modify our standard designs in support of custom-generated specifications that are typically required in stringent system applications. These critical requirements often require high spectral purity. MITEQ can obtain high levels of fundamental and spurious signal suppression as required in many frequency source applications by employing special
filter technologies.

In addition to custom-filter designs, MITEQ also has advanced amplifier technologies which, when combined with balanced multiplier designs, offer high performance active multipliers especially in the areas of shaped frequency response and desired output levels.

All multiplier products are backed by MITEQ's 3-Year Warranty and most are available as RoHs Compliant components.

NEW MULTIPLIER PRODUCTS
X6 Multiplier MITEQ introduces two more models into their multiplier family of products.  Model SYS6X0639 is an X6 multiplier that accepts inputs from 6.375 to 6.566 MHz at 10 dBm and produces outputs from 38.250 to 39.400 MHz at 5 dBm.  Input harmonic rejection is –70 dBc minimum and the unit includes integrated printed filters.  The SYS6X0639 measures 1.280” x 1.200” x 0.275”. Frequency Quadrupler Model SYS4X0520 is a frequency quadrupler that produces a 20 GHz, 10 dBm signal for an input of 12 dBm at 5 GHz.  This multiplier also features high rejection to input harmonics by using printed ceramic filters to achieve –80 dBc or better suppression of odd harmonics and –70 dBc or better for even harmonics.  The SYS4X0520 measures 1.280” x 1.200” x 0.270” without connectors.  Both multipliers are supplied with field replaceable SMA female input and male output K-connectors, require +15V at 130 mA, -15V at 10 mA and are supplied in hermetic housings.