|
|
New Amplifier Products
|
| Weatherproof Ka-Band Low Noise Amplifier |
Model AMFW-7F-17702130-120-23P-WP is MITEQs newest addition to its family of high-performance waveguide LNAs. The Model AMFW-7F-17702130-120-23P-WP is a very low noise, high dynamic range weatherproof Ka-band front end, operating 17.7 to 21.3 GHz. With isolator protected and pressure sealed WR-42 waveguide input and K(F) connector output, in addition to being lightweight, this low-noise amplifier has a small profile and footprint. The aluminum alloy housing is sealed against most severe environmental conditions and also fully EMI shielded. This LNA includes reverse voltage, over current and over temperature protection in addition to full internal regulation. Total weight is approximately 800 grams, and dimensions are 156mm x 70mm x 51mm. The AMFW-7F-17702130-120-23P-WP has a minimum gain of 60 dB, flat to within ±1 dB, and maximum noise temperature of 120 K° and is capable of a minimum of 23 dBm P1dB across the full band. Noise temperature will typically change with base temperature of the LNA at a rate of 0.28 K/°C. Output IP3 is 30 dBm minimum. Input and output port VSWR is a maximum of 1.25:1 and 1.5:1 respectively. Gain is stable to less than 0.4 dB/month. Total group delay is constant to less than 1 nsec over the full band. Current draw is nominally 700 mA from a single +12V to +24V supply. Other voltage ranges and alarm options are available. Operating temperature is -40 to +60?C case.
specific model long(TechnicalInfo)
|
| 18-40 GHz Low-Noise/Medium Power Amplifier |
Model JS3-18004000-40-15P is a state-of-the-art low-noise medium power amplifier with only 4 dB maximum noise figure and +15 dBm P1dB. This model has a gain of 32 dB minimum in a small hermetically sealed package with field replaceable K-connectors. MIL-883 screening is also available. Different options such as gain, noise figure and power output are also available.
specific model long(TechnicalInfo)
|
| Airborne HPA |
MCL, Inc., a MITEQ Company, introduces its newest member of the outdoor TWTA family, the MT2100. Providing industry-leading efficiency, this amplifier was engineered to support airborne applications. The rugged ultra compact design weighs 25 pounds and can be adapted to military flight qualification requirements. This model operates at 125 Watts (100 Watts at the flange) at the 6-18 GHz frequency range. The MT2100 features flexible prime power configurations and can operate at 70°C. This compact TWTA is conduction cooled; however, air cooled or liquid cooled operations are available.
|
| Compact, Ultra-Broadband Medium Power Amplifier |
Model AMF-4D-02002650-90-20P is a rugged, single bias ultra-broadband coaxial amplifiers. This amplifier has over 25 dB of gain from 2.0 GHz to 26.5 GHz, in a housing that is only 1" long and 0.83" wide without the field replaceable 2.92 mm connectors. Gain flatness is a maximum of &plusmin;2.5 dB, though typical is &plusmin;2.0 dB. The AMF-4D-02002650-90-20P has a maximum noise figure of 9.0 dB in the full band, though the typical value is near 6.0 dB. This amplifier operates from -40 to +75°C of base temperature, has a P1dB minimum of +20 dBm, IP3 is typically +26 dBm, and a current draw of maximum 450 mA from a single +15V DC supply. Port VSWR is typically less than 2:1 for both input and output. Composite metal body with a CuW base provides excellent thermal characteristics while hermetic sealing option is available if required. With its built-in sequencing, regulation and reverse bias and over-temperature and over-current protection, only a single positive bias is required. Frequency options from as low as 100 MHz to as high as 40 GHz are available.
specific model long(TechnicalInfo)
|
| High Dynamic Range, Wideband LNA |
Model AMF-2F-00020050-20-28P MITEQ Model AMF-2F-00020050-20-28P is a new addition to its family of low noise, wideband, and ultra-small coaxial LNAs in the 20 to 500 MHz band. This LNA has over 35 dB of gain in a housing that is only 1.22" long and 0.88" wide without the field-replaceable SMA connectors that are mounted on a removable heatsink. Gain flatness is a maximum of &plusmin;1.75 dB, though typical is &plusmin;1.0 dB. The AMF-2F-00020050-20-28P has a maximum noise figure of 2.0 dB in the full band, though the typical value is 1.5 dB. This unit operates from -40 to +75°C, has an output P1dB of minimum +28 dBm, output IP3 of typically +40 dBm, output 1P2 of typically +58 dBm, and a current draw of maximum 500 mA from a single +15V DC from 25 to 50 dB are available in the same outline. The aluminum alloy housing provides excellent thermal performance in addition to being very small and lightweight. Hermetic sealing is an option. Wider frequency options are available.
specific model long(TechnicalInfo)
|
| Coaxial and Compact Ka-Band Line Amplifier |
Model AMF-6F-17702200-50-17P has been added to MITEQ's family of Ka-Band, single bias, coaxial line amplifiers. This LNA has over 35 dB of gain from 17.7 GHz to 22.0 GHz, in a housing that is only 0.72" long and 0.75" wide without the field replaceable K-connectors. Gain flatness is a maximum of 3.0 dB peak-to-peak, though typical is less than 2.0 dB. The AMF-6F-17702200-50-17P has a maximum noise figure of 5.0 dB in the full band, though the typical value is less than 3 dB. This unit operates from -40 to +75?C of base temperature, has a P1dB minimum of +17 dBm, output IP3 of typically +25 dBm, and a current draw of maximum 300 mA from a single +15V DC supply. Port VSWR is typically less than 2:1 for both input and output. Aluminum case provides excellent thermal characteristics. Features wider bandwidth and higher P1dB. Hermetic sealing and low noise figure options are available.
specific model long(TechnicalInfo)
|
| HF through RF Ultra Small and Low Noise Coaxial LNA |
Model AMF-2F-00100200-16-15P is a new addition, to its family of extremely low noise and ultra small coaxial LNAs in the 0.1-2 GHz band. This LNA has over 30 dB of gain in a housing that is only 1.22¨ long and 0.88¨ wide without the field-replaceable SMA connectors. Gain flatness is a maximum of ±1 dB, though typical is ±0.75 dB. The AMF-2F-00100200-16-15P has a maximum noise figure of 1.6 dB in the full band, though the typical value is 1 dB. It operates from -40 to +75°C, has a P1dB of minimum 15 dBm, IP3 of typically 25 dBm, and a current draw of maximum 135 mA from a single +15V DC supply. Port VSWR is less than 2:1 for both input and output. Other models with typical gains ranging from 25 to 50 dB are available in the same outline. The aluminum alloy housing provides excellent thermal performance in addition to being very small and light. Hermetic sealing is an option.
specific model long(TechnicalInfo)
|
|
|
