|
Uplink Power Control Products...
MITEQ's offers Uplink Power Control Systems that are selfcontained, rack-mountable and designed for geostationary satellite communication systems. These uplink power control systems adjust the strength of uplink signals at IF frequencies to compensate for varying weather conditions.
Newly Designed Product For April 2008:
Beacon Receiver
MITEQ’s BR Series Beacon
Receiver is a versatile receiver designed to lock onto a CW or modulated
carrier and provide accurate and reliable relative power measurement indicators
for either antenna positioning or uplink power control applications.
The BR-L operates in the
L-Band and accepts a 940-2150 MHz signal. The outputs of the beacon receiver are analog and digital indicators of
power measured at the input of the beacon receiver. The beacon receiver fits neatly into a single EIA standard
rack height (1.75 inches).
The rich feature set of
controls and indicators are easily accessible via in intuitive operating
environment. The receiver can be
setup completely from the front panel or over a remote bus via a host computer. There are 32 memory locations where
various setups can be stored and recalled easily. Also, a log is continuously updated with time-stamped
records of alarm activity.
|
|
|
