Home|Contact Us|Suppliers|Employee Information|Site map|My Account
Narda-MITEQ

Model: AMFW-6S-07250775-45-P2

Get A Quote
Description:Amplifier
Specifications at23 °C:
Frequency:7.25 to 7.75 GHz
Gain:50 dB min.
Gain Flatness:1 dB+/- max.
Noise Figure:0.626 dB max.
Noise Temperature:45 K max.
VSWR In:1.25:1 max.
VSWR Out:1.5:1 max.
P1dB Out:20 dBm min.
Voltage:15 V nom.
Current:300 mA nom.
Outline Drawing:138968-1
Operating Temp:-40 to 60 °C
Get A Quote

Documents for AMFW-6S-07250775-45-P2

Outline Drawing: 138968 (PDF)

ITAR: NO

RoHS Compliant: No
Similar Models
AMFW-6S-07250775-45
AMFW-6S-07250775-45-23P
AMFW-6S-07250775-45-F-TRF
AMFW-6S-07250775-45-N
AMFW-6S-07250775-45-N-C-CP
AMFW-6S-07250775-45-N-C-CP-F
AMFW-6S-07250775-45-P1
AMFW-6S-07250775-45-P1-TC
AMFW-6S-07250775-45-P2-TC
AMFW-6S-07250775-45-P2-TC-F
AMFW-6S-07250775-45-TC-F-P2-N
AMFW-6S-07250775-45K-P1
AMFW-6S-07250775-45K-P1-TC
AMFW-6S-07250775-50
AMFW-6S-07250775-50-UG138
AMFW-6S-07250775-55
AMFW-6S-07250775-55-UG138
AMFW-6S-07250775-60
AMFW-6S-07250775-65

Available Options for AMFW-6S-07250775-45-P2:

OptionDescriptionDetails
-TCTemperature compensationGain Variation vs. Temperature = 3.00 dB, pk-pk, maximum, -40ºC to +60ºC. (Note that the connectorized amplifiers specify a different temperature range.)
-BDC Bias Through a Solder Pin
-CBias-Tee at the RF Output
-OPower Supply, 110/220 VACFor most models, integrated inside the LNA housing. Operating temperature range from -15ºC to +60ºC.
-FFault Alarm, Form-C Contact ClosureFor most models, integrated inside the LNA housing. Operating temperature range from -15ºC to +60ºC.
-NEGNegative DC Input Voltage (-24VDC)DC Input Voltage at -24.0 VDC. Operating temperature range from -15ºC to +60ºC.
-P1+15dBm output
-P2+20dBm output
-13P+13dBm output
-23P+23dBm output
-TRFTransmit Reject Filter (C-Band)Above 5.20 GHz, Rejection of 20.0 dB, minimum.
-TRFTransmit Reject Filter (X-Band)Necessitates an outline change to MITEQ drawing 135805.
-TRFTransmit Reject Filter (Ku-Band)Above 13.5 GHz, Rejection of 20.0 dB, minimum.
-24M2.4 mm Female Output ConnectorNot available on all models. Consult factory for details
-430FCPR430F Input WaveguideS-Band only. MITEQ outline drawing changes to 148029.
-LInput LimiterProtection up to +27.0 dBm CW. May degrade Noise Temperature and Input VSWR.
-APMAmplitude and Phase MatchAmplitude Matching (per pair) = +/-1 dB, max Phase Matching (per pair) = ± 10º, maximum
-GWGain Window
-ISOIsolator
-NN female connNot available on all models. Comes standard on C-Band LNAs.
-WR28WR28 on Output
-WPWeatherproof Housing (KA Band)Lowest noise temperature with this option is limited to 120K and output IP3 to 30 dB. Changes Outline to 148201-X. WP option adds additional 10K noise so it necessitates 110K as starting point for pricing.

Options may not apply to all models.